Remote Counter

The Remote Counter is made with SMD (surface mounted devices) technology

A PCB is mounted in a water-proof metal box with a front panel which will prevent dust from damaging the interior..

Remote Counter is sold with a mounting bracket which allows the user to mount the unit on any surface, horizontal or vertical or at any angle

Remote Counter can work in pair with Master Counter as a stand alone unit

SPEC: Remote Counter

• Dimensions are: 153x 86x33 millimeters
• The unit weighs 330g
• Two green LED displays

Upper display has digits size of 14mm and five digits

Lower display has digits size of 20mm. and four digits

• Resolution 1m or 10m depends on resolution chosen in “MASTER COUNTER
1. A precise stopper display from the “MASTER COUNTER” but it will show only full seconds without hundreds or tents of seconds.
2. A speedometer display will show ground speed in km/h will also display miles per hour on three digits upper display.
3. Static memory for one calibration
4. Memory for last displays on power lost or switch off
5. Battery saver puts the unit into sleep mode after ten minutes of vehicle inactivity.
6. Can read any speed sensors, ABS sensors or any movement sensors.
7. Works in yards/miles and meters/kilometers
8. Can work in master – slave setup.
9. The “Remote Counter” will display speed over ground and as well as the “active” display of the “MASTER COUNTER”

A complete manual can be download herehttp://www.roadprocessors.com/REMOTE-COUNTER-EN.pdf